POLIDENT PINK CAD-CAM DISCS
Discs could be used for immediate load implant denture as a long term provisional in combination with denture teeth and titanium connectors.
The denture bases and other structures are designed in CAD Software.
A 5-Axis milling machine is required, to reach undercut areas.
Teeth can be milled directly or used in conjunction with artificial teeth which are attached on denture base with PMMA resin or light curing composite material with proper primer.
An offset of about 1.0mm should be designed in the gum area around the teeth margin to be later covered with pink cold-curing acrylate or composite. The amount of the material should be think enough to caver the line between the pink and dentin to a sure the end result has a naturaly looking transition of pink to white.
Polident Pink CAD/CAM discs are made of polymethylmethacrylate (PMMA) with inorganic pigments.
Vickers hardness: 26,60 HV.
Flexural strength: 114 MPa.
E-Module: 2771 MPa.
Residual monomer: < 1%.
Diameter: 95 – 105 mm. Thickness: 30mm. (denture base layer 18mm, dentin layer 12mm).
Indications: full dentures, partial dentures
Shades: Pink / dentin layer: A1, A2, A3. Other shades available upon request.