AxZir ST-White Dental Zirconia

SKU: DEN-AXZIR-ST-WHT
AxZir ST-White Dental Zirconia AxZir Discs are optimized for open systems. All blanks consist of pre-sintered zirconium dioxide stabilized with yttrium oxide (3Y-TZP-A).

These blanks are distinguished by their enhanced strength and long-term hydro-thermal stability. An absolutely homogeneous structure is achieved through a specially developed production process.

The blanks are optimized for rapid milling strategies and provide excellent edge stability and green body breaking strength during processing.

*
 
$65.60
  • subtitles Full description

    ST-White super-translucent zirconia, for full-contour crowns & bridges 
    16 Shade and 7 Enhancement Liquids are Available for AxZir ST and TT Zirconia

     
    INDICATION HT-WHITE ST-WHITE TT-WHITE
    COPINGS X X X
    2-4 UNIT FRAMEWORKS X X 2-3 UNITS
    5-6 UNIT FRAMEWORKS** X X -
    CANTILEVER BRIDGE* X X -
    INLAY BRIDGE* X X -
    MARYLAND BRIDGE* X X -
    TELESCOPIC CROWN X X X
    CUSTOM ABUTMENT X X X
    VENEER - - X

    * Except for patient with bruxism

    ** Possible, not recommended. Less than3 sequential pontics for the anterior.Less than 2 sequential pontics for the posterior.

     


     

    CHARACTERISTIC HT-WHITE ST-WHITE TT-WHITE
    DENSITY BEFORE SINTERING 3.1±0.5g/cm3 3.1±0.5g/cm3 >2.8g/cm3
    DENSITY AFTER SINTERING 6.08±0.01 g/cm3 6.08±0.01 g/cm3 6.04±0.03 g/cm3
    3-POINT FLEXURAL STRENGTH AFTER SINTERING 1400 Mpa 1200 Mpa >600 Mpa
    CHEMICAL SOLUBILITY AFTER SINTERING < 100µg/cm2 < 100µg/cm2 < 100µg/cm2
    TRANSLUCENCY 37% 43% 49%
    RADIOACTIVITY AFTER SINTERING <0.1 Bg/g <0.1 Bg/g <0.1 Bg/g
    SINTERING TEMPERATURE 1400-1550°C 1400-1550°C 1430-1470°C
    ACCELERATED AGING SURFACE MONOCLINIC PHASE CONTENT <15% <15% <5%

     

     
     
Customers who bought this item also bought

AxZir TT Vida Color Shading Liquids

AxZir is produced by one of the largest zirconia manufacturer in the world and with over 45% market share, the biggest in China. Their products are exported to more than 69 countries in the world.
All of our products are CE, FDA certified.

Intended use: Coloring Liquid is a liquid used for the complete or partial coloration of milled AxZir zirconia substructure and anatomy before sintering.

Benefits include: