Custom Implant Abutment Solutions

With the VersaMILL 5X-200 you can stop out-sourcing your implant abutment business and increase your profits by as much as 300%.

Couple the accuracy and rigidity of the VersaMILL 5X-200 with the highly-efficient and comprehensive machining templates developed by our expert team of Application Engineers to quickly produce implant abutments from our FDA approved blanks and 6-Unit Abutment Fixture; the quality of which will astonish your customers.


Axsys is a recognized distributor of NT-Trading implant components in the U.S. These components consist of titanium bases and screws for all the major implant systems, as well as the corresponding laboratory analogs.

We can provide titanium or hybrid solutions for caps, crowns and bridge structures complete with implant libraries compatible with popular dental CAD software. This includes highly efficient machining templates that produce superior surface finishes and cycle times.

These interfaces allow for the custom milling of all major implants in your own milling machine. All products are stocked in the U.S., FDA-cleared and available for delivery.


Single-Unit Implant Systems

NT Trading scan bodies have been uniquely designed using pre-machine titanium interfaces. This metal interface insures accurate seating to analogs. In addition, this titanium interface resists deformation over time. The scan portion of the scan body has been designed to accurately transfer the angle, depth and non-rotational features of the analog. The material used for the scan bodies are scan friendly for all scanners and require no powder.


Titanium Bases & Millable Blanks

These bases have been specifically designed for automated manufacturing for single tooth screw retained restorations. The non-rotational engaging geometries provide implant-specific mating interfaces for hybrid custom abutments and full contour single tooth replacement. For full contour screw retained restorations materials of choice can be either zirconia or e.max.

The titanium base comes with a final retaining screw. This screw driver configuration matches that of each specific implant manufacturer. As a result, there are no unique drivers needed.

The titanium base is cemented into the final restoration or the custom abutment as the final step in manufacturing. The recommended cement for the titanium base is Multilink Implant cement from Ivoclar Vivadent.


Pre-Assembled Kits

Axsys is providing custom Scan Body Kits for each suported interface. The kit includes the implant library, six millable blanks (with milling screw), one analog and six abutment screws.

The Axsys Complete Starter Kit is also available which inludes our 6-unit abutment fixture; 3.5mm, 4.3mm and 5.0mm fixture inserts and scan body 3D guides. For each interface the Complete Starter Kit also incudes (6) titanium blanks with abutment screws, individual analog's and screwdriver inserts and screwdriver inserts.



Supported interfaces include:

  • Nobel Biocare™ Nobel Active™
  • Nobel Biocare™ Nobel Replace Select®
  • Zimmer Tapered Screw-Vent®
  • Straumann Bone Level®
  • Straumann SynOcta®
  • Biomet 3i Osseotite®
  • Biomet 3i Certain®
  • Astra Tech OsseoSpeed®
"The machining templates developed by our team of manufacturing experts produce superior quality abutments in the shortest possible time".

Single-Unit Implant Systems

NT-Trading Single-Unit Implant Systems are ideal for fabricating hybrid abutments and screw-retained crowns and can also be used in bridge frameworks
    Additional System Features:
  • Complete Abutment Libraries are Available
  • Compatible with the Most Popular CAD/CAM Systems
  • Robust Delcam DentMILL Machining Templates are Available
  • Single-Unit Titanium Bases are FDA approved


Multi-Unit Implant Systems

The new 2-CONnect system from NT-Trading is specifically designed for fabricating hybrid multi-unit restorations like screw-retained bridges and implant bars. The system enables connecting implants with up to 35 degree divergence. It uses all digital manufacturing and is incredibly accurate.

The 2-CONnect Abutment consists of one Abutment with screw (for fixation of abutment to the implant) and one titanium cap with one tiny screw (fixed into the hollow Abutment screw). The cap on top fits exactly to the abutment-geometry and does not have a rotation fixation, so it is easy to work with.

Compatible with the most popular CAD/CAM Systems, all NT-Trading 2-CONnect Titanium Bases are FDA approved.

Download the Catalog

The NT-Trading E and F Series products, intended for custom milled zirconia abutments, are made of Grade 5 titanium and include abutment screw. Scan Bodies and 3D Guides are constructed from the advanced biomaterial PEEK and ready for scanning while the lab analog’s are made from high strength stainless steel.

Abutment Style Note:
1. Ti Base, Straight, 16° Over Surface &, HSL (Rotation Index)
2. Ti Base Only


The NT-Trading R-Series products, intended for Zimmer Dental Tapered Screw Vent® custom milled zirconia abutments, are made of Grade 5 titanium and include abutment screw. Scan Bodies and 3D Guides are constructed from the advanced biomaterial PEEK and ready for scanning while the lab analog’s are made from high strength stainless steel.

NT-Trading 2-CONnect Mult-Unit Systems

The NT-Trading L & N Series products, intended for custom milled zirconia abutments, are made of Grade 5 titanium and include abutment screw. Scan Bodies and 3D Guides are constructed from the advanced biomaterial PEEK and ready for scanning while the lab analog’s are made from high strength stainless steel.

Abutment Style Note:
1. Ti Base, Straight, HSL (Rotation Index) & HSL Rotating
2. WN-Massiv Abutment Also Available (4.0mm Height)

Abutment Style Note:
3. Ti Base, Straight: GH 2.5mm & GH 3.0mm, HSL (Rotation Index)


The NT-Trading H & I Series products, intended for custom milled zirconia abutments, are made of Grade 5 titanium and include abutment screw. Scan Bodies and 3D Guides are constructed from the advanced biomaterial PEEK and ready for scanning while the lab analog’s are made from high strength stainless steel.


The NT-Trading S Series products, intended for custom milled zirconia abutments, are made of Grade 5 titanium and include abutment screw. Scan Bodies and 3D Guides are constructed from the advanced biomaterial PEEK and ready for scanning while the lab analog’s are made from high strength stainless steel.























Single-Unit Abutment Blanks

NT-Trading Pre-Form Single-Unit pre-milled abutment blanks are ideal for fabricating hybrid abutments and screw-retained crowns and can also be used in bridge frameworks

Pre-Form abutment blanks are made of high quality Grade 5 titanium and are available for the most popular implant systems.

System components include; groove indexed lab analog's, milling screws, abutment screws and abutment fixture grips for use in our versatile 6-position abutment fixture.

    Additional System Features:
  • Complete Abutment Libraries are Available
  • Compatible with the Most Popular CAD/CAM Systems
  • Robust Delcam DentMILL Machining Templates are Available
  • Single-Unit Titanium Blanks are FDA approved


Easy, Accurate and Rigid Multi-Unit Fixture

The latest version of our NT-Abutment cartridge for the VersaMILL 5X-200 introduces many advantages and improvements over standard products.

Our abutment manufacturing system utilizes the same base fixture utilized for zirconia cartridges. This time and money saving approach, coupled with the ability to easily swap between the VersaMILL’s dual coolant tanks makes transitioning between machining titanium abutment blanks and zirconia easier than ever.

The abutment cartridge mounts directly into the standard VersaMILL 5X-200 fixture so there is no need for technicians to go through a complicated and lengthy calibration routine.

The abutment cartridge mounts directly into the standard VersaMILL 5X-200 fixture so there is no need for technicians to go through a complicated and lengthy calibration routine.

    Additional System Features:
  • Highly accurate one piece design minimizes stacked tolerances
  • Cartridge is finished machined directly on each mill ensuring positional accuracy without complicated setup
  • Fully compatible with NT-Trading abutment inserts, analogs, and blanks
  • Alignment pins ensure repeatable accuracy
  • Sub-30 Micron repeatability possible
  • Blank is fully supported by both the analog and tailstock greatly improving rigidity and surface finish
  • Tailstock is designed so that any rotational forces induced during milling are NOT applied directly to the interface
  • Modular design allows labs and milling centers to mix and match different size abutments and platforms in a single setup

Download the Catalog



The NT-Trading E and F Series products, intended for custom milled zirconia abutments, are made of Grade 5 titanium and include abutment screw. Scan Bodies and 3D Guides are constructed from the advanced biomaterial PEEK and ready for scanning while the lab analog’s are made from high strength stainless steel.



The NT-Trading R-Series products, intended for Zimmer Dental Tapered Screw Vent® custom milled zirconia abutments, are made of Grade 5 titanium and include abutment screw. Scan Bodies and 3D Guides are constructed from the advanced biomaterial PEEK and ready for scanning while the lab analog’s are made from high strength stainless steel.

The NT-Trading L & N Series products, intended for custom milled zirconia abutments, are made of Grade 5 titanium and include abutment screw. Scan Bodies and 3D Guides are constructed from the advanced biomaterial PEEK and ready for scanning while the lab analog’s are made from high strength stainless steel.

Abutment Style Note:
1. With & Without Shoulder

The NT-Trading H & I Series products, intended for custom milled zirconia abutments, are made of Grade 5 titanium and include abutment screw. Scan Bodies and 3D Guides are constructed from the advanced biomaterial PEEK and ready for scanning while the lab analog’s are made from high strength stainless steel.


We've put together some money saving starter packages containing the key components of our abutment machining solution.

All components are compatible with the NT-Trading fixture for the VersaMILL and other supported milling machines and designed to provide you with all that is necessary to get you up and running as quickly and easily as possible.

More in the Store...


Package does NOT include Abutment Grip Inserts. Fixture Insert Custom Machined on Your VersaMILL, Inspected and Assembled for Complete Accuracy and Repeatability.
Qty Description
1 6-Unit Fixture w/Calibration Unit & Cartridge Blank
1 VersaMILL Cartridge Blank w/Fixture Toolpath, Inspection & Assembly
1 Titanium Tooling Package: (2) 3mm, (1) 2mm, (1) 1.5mm, (1) 1.0mm TiSin Ball Nose Endmills

Details in Store...


Qty Description
1 6-Unit Abutment Fixture
3 Abutment Grip Inserts (3.5mm, 4.3mm or 5.0mm)
1 Hex Wrench Set
9 Analog Holding Screws
4 Holding Screw (Fixture Grip)
1 Fixture Grip Wrench
1 Custom Machining Templates
1 Lab Analog (Nobel Replace Select® Compatible)
3 NT-Preform w/ Milling Screw (4.3mm Nobel Replace Select® Compatible)
1 Titanium Tooling Package: (2) 3mm, (1) 2mm, (1) 1.5mm, (1) 1.0mm TiSin Ball Nose Endmills

Details in Store...


Qty Description
1 6-Unit Abutment Fixture w/Calibration Unit & Cartridge Blank
2 ea. Abutment Grip Insert (3.5mm, 4.3mm & 5.0mm)
1 Hex Wrench Set
18 Analog Holding Screw
4 Holding Screw (Fixture Grip Insert)
1 Fixture Grip Wrench
1 Custom Machining Templates (All Supported Systems)
1 ea. Lab Analog (All Supported Platforms)1
2 ea. NT-Preform w/Milling Screws (All Supported Platforms)1
6 ea. Titanium Tooling Package: (2) 3mm, (1) 2mm, (1) 1.5mm, (1) 1.0mm TiSin Ball Nose Endmills

Note(s):
1. Includes: Nobel Biocare Active®, Nobel Biocare Replace Select®, Zimmer Tapered Screw Vent®, Straumann SynOcta®, Biomet 3i Oseotite®, Biomet 3i Certain® & Astra Tech Osseospeed®

Details in Store...


INSERT GRIP 3.5mm
System Description
1 Replace Select® Lab Analog 3.5mm NP
2 SynOCta® Lab Analog 3.5mm NN
3 Bone Level® Labv Analog 3.3mm NC
4 Astra® Lab Analog 3.5mm/4.0mm
5 Zimmer® Lab Analog 3.5mm
6 3i Certain® Lab Analog 3.4mm
7 Nobel Active® Lab Analog 3.5mm NP

Details in Store...






INSERT GRIP 4.3mm
Qty Description
1 Replace Select® Lab Analog 4.3mm RP
2 SynOcta® Lab Analog 4.8mm RN
3 Bone Level® Lab Analog 4.1mm/4.8mm
4 Astra® Lab Analog 4.5mm/5.0mm
5 Zimmer® Lab Analog 4.5mm
6 3i® Lab Analog 4.1mm
7 Nobel Active® Lab Analog 4.3/5.0mm RP
8 3i Certain® Lab Analog 4.1mm

Details in Store...





INSERT GRIP 5.0MM
Qty Description
1 Replace Select® Lab Analog 5.0mm WP
2 SynOcta® Lab Analog 6.5mm WN
3 Zimmer® Lab Analog 5.7mm
4 3i Certain® Lab Analog 5.0mm

Details in Store...











































"I'm very impressed with the tool life we are seeing from all of the tools in this mill..."

– Chris Brown, Apex Dental Milling

Implant Abutments

Move ahead of your competition by providing high quality implant abutments profitably, at twice the speed and quality of competitive solutions.

Our highly rigid fixture with tailstock offers full support of the abutment blanks, increasing surface finish and tool life.

Our team of experts have produced high quality, time and cost saving templates for our FDA approved abutment blanks for popular Nobel, Zimmer, 3i, Astra and Straumann interfaces.

With the VersaMILL 5X-200 you can stop out sourcing your implant abutment business and increase your profits by as much as 300%.



Dental Bars

Expand your business by providing high quality dental bars of reliable fit and finish.

The strength and rigidity of the VersaMILL enable our team of manufacturing experts to utilize the most effective machining techniques learned from years of programming, fixturing and machining extremely complex parts made of the hardest of materials.

You can count on the VersaMILL and Axsys to provide you with all that is necessary to produce a high quality product, in the shortest timeframe with minimal bench time and tooling costs.



Zirconia, Glass Ceramics, Models and More

Whatever the restoration type or material, the VersaMILL can handle it and Axsys can show you how do it efficiently and profitably.

With tooling costs and machine cycle times at only a fraction of our competitors, cutting tools that last over 200% longer and unbeatable quality, Axsys and the VersaMILL are the logical choices to take you to the next level in your dental business

Please Contact Us today to learn more about the VersaMILL and the Axsys Advantage.




...Because It's More Than Just About the Machine.



Select a Product or Product Category